Fante's Since 1906Fante's Kitchen Shop Logo
FACEBOOK     EVENTS     BLOG     HOURS     ABOUT     CONTACT     SHOP

NRTL
Nationally Recognized Testing Laboratory

The NRTL Program recognizes mainly private sector organizations that provide product safety testing and certification services to manufacturers.

OSHA WebsiteThe testing and certification are performed to U.S. consensus-based product safety test standards, on items for which the Occupational Health & Safety Administration (OSHA) requires safety standards.

American National Standards InstituteThese test standards are not developed or issued by OSHA, but are issued by U.S. standards organizations, such as the American National Standards Institute (ANSI).

The range of products covered by the Program is limited to those items for which OSHA safety standards require "certification" by an NRTL. The requirements mainly affect electrical products, and many products used in the foodservice industry.

Recognition is granted to organizations that meet the requirements established by OSHA for an NRTL. The Program regulations list the requirements, which are summarized as follows:

(Source: Occupational Safety & Health Administration (OSHA) - NRTL Program Policies, Procedures, and Guidelines)

 


Certification Marks

NRTLs use the following marks to certify products for purposes of OSHA product-approval requirements. However, the presence of the mark on a product does not necessarily mean that it meets OSHA requirements, since NRTLs sometimes use these same or similar marks for non-OSHA purposes. OSHA accepts only those products that contain the NRTL's mark and that the NRTL has certified within its scope of recognition, which includes the test standards and testing sites that OSHA has recognized for the NRTL. See the OSHA web page for information on each NRTL's scope of recognition, or contact OSHA or the NRTL for additional information.

Applied Research Laboratories, Inc. (ARL) Applied Research Laboratories  
 
Canadian Standards Association (CSA) Canadian Standards Association - NRTL Canadian Standards Association - NRTL C
  Canadian Standards Association - NRTL US Candadian Standards Association - NRTL C US
  Used for products meeting only U.S. standards Used for products meeting both U.S. and Canadian standards
  Canadian Standards Association - Gas  
  Used for gas-fueled products meeting U.S. standards2  
 
Canadian Standards Association (CSA)(mark formerly used by the American Gas Association (AGA), exclusively licensed to CSA until June 30, 2001) Canadian Standards Association - AGA  
 
Communication Certification Laboratory, Inc. (CCL) Communication Certification Laboratory  
 
Curtis-Straus LLC (CSL) Curtis Straus LLC  
 
Electro-Test, Inc. (ETI) Electro-Test Inc  
 
FM Global Technologies LLC (FM) (also known as FM Approvals and formerly Factory Mutual Research Corporation) FM Global Technologies  
 
Intertek Testing Services NA, Inc. (ITSNA) (formerly ETL Testing Laboratories, Inc.) Used for products meeting only U.S. standards Used for products meeting both U.S. and Canadian standards
  Intertek Testing Services Intertek Testing Services
  Intertek Testing Services  
  Intertek Testing Services - Warnock Hersey Intertek Testing Services - Warnock Hersey
  Intertek Testing Services - Warnock Hersey  
 
MET Laboratories, Inc. (MET) Met Laboratories  
 
NSF International (NSF) National Sanitary Foundation  
 
National Technical Systems, Inc. (NTS) National Technical Systems Inc  
 
SGS U. S. Testing Company, Inc. (SGSUS) (formerly U.S. Testing Company, Inc.) SGS US Testing Company Inc  
 
Southwest Research Institute (SWRI) Southwest Research Institute  
 
TUV America, Inc. (TUVAM) TUV America Inc  
 
TUV Product Services GmbH (TUVPSG) TUV Product Services GmbH  
 
TUV Rheinland of North America, Inc. (TUV) TUV Rheinland of North America Inc  
  NRTL previously used but ceased authorizing on or about January 2000.  
  RUV Rheinland of North America Inc RUV Rheinland of North America Inc
  Used for products meeting only U.S. standards Used for products meeting both U.S. and Canadian standards
 
Underwriters Laboratories Inc. (UL)    
  Used for products meeting only U.S. standards Used for products meeting both U.S. and Canadian standards
Basic marks Underwriters Laboratories Inc Underwriters Laboratories Inc
Equivalent to above Underwriters Laboratories Inc Underwriters Laboratories Inc
"Used on products which UL has evaluated for specific properties, a limited range of hazards, or suitability for use under limited or special conditions. Typically, products Classified by UL fall into the general categories of building materials and industrial equipment." Examples: fire doors, protective gear for fire fighters, industrial trucks. Underwriters Laboratories Inc Underwriters Laboratories Inc
 
Wyle Laboratories (WL) Wyle Laboratories  

1 Certification marks registered by the NRTL with the US Patent and Trademark Office. Some NRTLs may have additional marks; however, the core logo of the additional marks should be the same as represented here. If you have questions about the authenticity of any mark, contact the NRTL.

2 OSHA requirements for testing and certification of gas operated equipment is limited to equipment using "liquefied petroleum gas" ("LPG" or "LP-Gas").

Revision Date: 28 April 2003


 
From OSHA's main page on NRTL's: www.osha.gov/dts/otpca/nrtl/index.html

 
Organizations Currently Recognized By OSHA as NRTLs:


Click on the NRTL name shown above to view its scope of recognition (the list of standards, sites, and programs that OSHA has recognized for the NRTL).
See March 9, 1995, Federal Register notice for more detailed information about the programs that an NRTL may use.
Also see the FAQs.



Other Marks

What's the difference between the familiar UL Mark and other Listed Marks?

All NRTL marks demonstrate that the product that bears it has met the minimum requirements of widely accepted product safety standards as determined through the independent testing of a Nationally Recognized Testing Laboratory (NRTL). And, as part of that testing regimen, the product manufacturer has agreed to periodic follow-up inspections to verify continued compliance. So, the only real difference between the marks is in the service, and services of the testing laboratory behind them.
 

CE Mark
CE Mark. This is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European Directives. The letters 'CE' are an abbreviation of Conformité Européenne, French for European conformity. The CE mark must be affixed to a product if it falls under the scope of the approx. 20 so called 'New Approach' Directives. Without the CE marking, and thus without complying with the provisions of the Directives, the product may not be placed in the market or put into service in the fifteen member states of the European Union and Norway, Iceland and Liechtenstein. However, if the product meets the provisions of the applicable European Directives, and the CE mark is affixed to a product, these countries may not prohibit, restrict or impede the placing in the market or putting into service of the product. Thus, CE marking can be regarded as the products trade passport for Europe.

The CE mark is unrelated to the requirements for product safety in the US. It is a generic mark used in the European Union (EU) to indicate that a manufacturer has declared that the product meets requirements in the EU for product safety. In the US, under OSHA's NRTL requirements, the product must have the specific mark of one of the NRTLs recognized to test and certify these types of products.

S Mark
S Mark. An electrical, mechanical or electro-mechanical product bearing the S mark signifies that it was tested and meets the minimum requirements of prescribed and harmonized European Union product safety standards.

GS Mark
GS Mark. An electrical, mechanical or electro-mechanical product bearing the GS mark indicates that it was tested and complies with the minimum requirements of the German Device Safety Act (a.k.a., GSG). The GS mark is a licensed mark of the German government, which may only be issued by an accredited product safety testing and certification agency. ETL SEMKO is authorized to issue the GS mark-wholly enabled by the electro-technical products partnership its parent company ITS maintains with the German-based Dekra Certification Services. A GS mark issued by ETL SEMKO will carry the "ITS" corporate identifier in the upper left-hand corner of the mark.

 


(Note: The above companies and OSHA are not affiliated with fantes.com in any way. The above information is provided for informational purposes only and should not be relied upon as complete.)

 

Top