Fante's Since 1906Fante's Kitchen Shop Logo
FACEBOOK     EVENTS     BLOG     HOURS     ABOUT     CONTACT     SHOP

Page Contents:
-Prepare the Machine for Use
-Prepare the Dough Mixture
-Roll & Cut the Dough
-Maintenance
-Warranty

Marcato Atlas Pasta Maker Instructions

Atlas Pasta Maker by Marcato - Instructions on Use & Care
How to Order
The Marcato Atlas 150 Masta Machine


How to prepare the machine for use

Step 1

Affix the machine onto the table or work surface with the clamp provided and insert the handle into the roller hole (1).

When using the machine for the first time, clean it with a dry cloth to remove any excess oil. To clean the rollers, pass a small quantity of dough through them and then throw the dough away.

Note:
The conversions in Fig. 1 should be:
1 lb = 453.59 g
1 oz = 28.35 g
1 pt = 0.47 l
1 qt = 0.95 l
1 gal = 3.78 l


How to prepare the pasta dough mixture

Serves 6 people.

Ingredients:

500g (~1 lb) soft wheat flour and 5 eggs. Instead of using 5 eggs, you can use a glass of natural mineral water. For "al dente" pasta, mix 250g of soft wheat flour with 250g of durum wheat flour.

Do not add eggs straight from the fridge. Do not add any salt.

Step 2

Pour the flour into a bowl and the eggs into the middle of the flour (2). Mix the eggs with a fork until they are completely blended with the flour.

Step 3

Knead the mixture with your hands (3) until it is completely homogenous and consistent.

If the mixture is too dry, add some water; if it is too soft, add some flour. A good mixture should never stick to your fingers.

Step 4

Remove the mixture from the bowl and place it onto a lightly floured table (4).

Step 5

If necessary, continue to knead the mixture and cut it into small pieces (5).


How to roll and cut the dough with the Atlas

Step 6

Set the machine regulator to position 1, pulling it outwards and turning it so that the two smooth rollers are completely open (approx. 3 mm) (6).

Step 7

Pass a piece of mixture through the machine while turning the handle (7).

Step 8

Repeat this operation 5 to 6 times, folding the dough over and adding some flour to the middle if necessary (8).

Step 9

When the dough has taken a regular shape, pass it through the rollers once only with the regulators set on number 2 (approx. 0.2 mm) (9). When using a cutter that makes round spaghetti, set the regulator on number 5.

With a knife, cut the dough crossways in pieces approximately 25 cm (10") long.

Step 10

Insert the handle in the hole for the cutting rollers, turn it slowly, and pass the dough through so as to obtain the type of pasta you prefer (10) (11).

Step 11

 

Note 1: If the rollers won't cut, it means the dough is too soft. In this case, add flour to the mixture (8), then pass the dough through the smooth rollers repeatedly until the right texture is achieved.

Note 2: If the dough does not get "caught" by the cutting rollers, add a little water to the mixture (8), then pass it through the smooth rollers repeatedly until the right texture is achieved.

 

Place the cut pasta on a table cloth or drying rack, and leave it to dry for at least an hour.

Fresh pasta will keep for 1-2 weeks if stored in a cool, dry place.

Bring a pan of salted water to a boil (4 liters per 1/2 kg of pasta) to whish you will add the pasta.

Fresh pasta cooks in just 2-5 minutes, depending on its thickness.

Stir gently and then drain the pasta once it has finished cooking.


Maintenance of the Atlas Pasta Maker

Step 12

To remove cutting attachments, lift up, making it slide up along its tracks (12).

To install attachments, slide them down on the tracks (12).

Step 13

During use, keep the scrapers underneath the smooth rollers clean with parchment paper (13).

Step 14

Never wash the machine with water or in the dishwasher (14).

Step 15

To clean the machine after use, use a brush or a wooden rod (15).

Step 16

To clean the inside of the machine, remove the plastic protectors (16). (Only on some older models.)

Step 17

If necessary, put several drops of vaseline oil or mineral oil on the ends of the cutting rollers (17).

Do not insert knives or cloths in the rollers.

After use, replace the machine and its accessories in the original box.


Warranty

All Marcato products are manufactured using only the finest materials available and are subject to continuous quality control.

Because of this, they are guaranteed for 3 full years from the date of purchase against any manufacturing defect.

This guarantee does not cover damage to the machine caused by improper use or by use other than that illustrated in this manual.

 
Marcato S.p.A.
Via Rossignolo 12
35011 Campodarsego (PADOVA) Italy
Tel. +39 049 9200988
Fax +39 049 9200970

www.marcato.net

Top